Thursday, July 30, 2020

With a new Anti-Terror Act: Philippines take another step towards authoritarianism

This article is by

Share this article

Article Contributor(s)

Vanshita Banuana

Article Title

With a new Anti-Terror Act: Philippines take another step towards authoritarianism

Publisher

Global Views 360

Publication Date

July 30, 2020

URL

President Duterte addressing the 18th Congress

President Duterte addressing the 18th Congress | Source: Oliver Marquez via Philippine News Agency

On July 3, 2020, President of the Philippines, Rodrigo Duterte signed a new Anti-Terrorism Bill, which was rushed through the houses of Congress without appropriate discussion, and has amassed protests and disapproval within the nation and abroad since its draft was first announced.

The Confederation of Lawyers in Asia and Pacific (COLAP) has raised concerns that anti-terrorism bill of the Philippine government is “violative of human rights and the due process of the law.” It's statement opposing the the bill stated following concerns with the bill:

  1. It punishes suspected individuals for organizations who are proscribed as terrorists and that the very broad and vague definition of terrorism under the bill poses danger to the basic freedoms of the people.
  2. The suspect’s right to due process of law is virtually denied and the presumption of innocence until proven guilty by a court is virtually negated.
  3. It enable the President-backed Anti-Terrorism Council to label any individual or group as a terrorist “without the opportunity of being heard.
  4. Any member or sympathizer of a proscribed organization is punished as a terrorist even if he or she does not actually take arms against the government.
  5. The bill encroaches on one’s privacy as it gives the government access to personal and bank information and freezes bank accounts and assets.
  6. The bill violates the sovereign rights of states and the internationally mandated norm that criminal jurisdiction is confined to the territories of a state, citing its extraterritorial nature.

Hundreds of protestors took to the streets of Manila protesting the bill on 27th July when President Duterte gave his annual State of the Nation address. While it is true that the has nation faced the threat of terrorism in recent years, it is also agreed upon that Duterte’s response has been perhaps equally brutal.

This bill was also criticised by the Christian religious organisations which issued a joint declaration on this law. They stated “We are bothered by the broad and vague definition of terrorism and terrorist. It can include acts of dissent, free speech, right to assemble, right to organize, freedom of belief, among others. By such a broad definition it is open to abuse and misuse.”

An opposition Congress member, Edcel Lagman and two lawyer groups of Philippine approached the Philippine Supreme Court and asked it to strike down the new anti-terrorism law, or parts of it, as they called it unconstitutional for infringing on civil liberties.

The Philipino American Student Association (FASA) also denounced the new anti-terrorism law in its Instagram post which stated, “FASA sa UW denounces Duterte’s signing of the Anti-Terrorism Bill to which its terms do nothing to resolve the true terrorism in our nation and instead conducts an outright assault on the freedom of speech from our people living on the motherland and even Filipinx abroad,”

International Human Right organisation, Amnesty International’s Asia-Pacific Regional Director, Nicholas Bequelin, in response to this law said, “Under Duterte’s presidency, even the mildest government critics can be labelled terrorists. He further stated, “This law’s introduction is the latest example of the country’s ever-worsening human rights record. Once again, this shows why the UN should launch a formal investigation into ongoing widespread and systematic violations in the country.”

Prior to this, Duterte’s ‘war on drugs’ received global scrutiny, especially for the numerous extrajudicial killings that have occurred since he came to power and the effect of this aggressive policy on the poorest citizens of the nation.

Apart from this, he has also repeatedly voiced opinions in favour of martial law and silenced news media that spoke against him. But he seems to be encouraged largely by his own people, among whom Duterte continues to be popular.

Many have called Duterte the ‘revival’ of authoritarianism in the small Southeast Asian country, which has only recently seen some semblance of democracy after years of dictatorship under Ferdinand Marcos (of whom Duterte was a close family friend).

The Philippines is walking a thin line between fascism and democracy, and which side it ends up on depends not only on the actions of its government, but just as much on the actions of its people.

Support us to bring the world closer

To keep our content accessible we don't charge anything from our readers and rely on donations to continue working. Your support is critical in keeping Global Views 360 independent and helps us to present a well-rounded world view on different international issues for you. Every contribution, however big or small, is valuable for us to keep on delivering in future as well.

Support Us

Share this article

Read More

July 19, 2021 11:59 AM

3D Printing: The direction to go for the Indian Defense and Aerospace Industries

3D printing is the next big game-changer on the technological front, almost a revolution if you will. 3D printing, also known as additive manufacturing, is a process of creating three-dimensional objects by layering two-dimensional cross sections on top of one another. The two-dimensional cross sections are computer-designed and rendered, which makes it all the more advanced. From Aerospace to Defense and Medical to Automotive, products manufactured via 3D printing are spreading their reach in the markets quite swiftly. This article will take a look at how 3D printing is beneficial and how the technology can transform the Indian and Defense and Aerospace sectors once utilized to its full potential.

Additive manufacturing has the power to unlock a wide range of opportunities. It uses a 3D printer to create a layer-by-layer “addition” of material which is digitally constructed. Different types of materials which are currently being used for the same are metals, ceramics, special plastics, synthetic resins, and etc. 3D printing not only reduces the cost of production of various components but also gives the power to manufacture locally with design flexibility. The technology significantly speeds the process of designing; this is mainly because there is no requirement of tools. Traditional manufacturing usually takes months to either acquire necessary tools and further produce parts and components or import components from various places. However, once 3D printers are acquired, which they might be costly in themselves, they would ensure a smoother production process. Hence, due to the combination of localized manufacturing and no tools, tailor-made designs can be produced to match the necessities of various industries.  

https://upload.wikimedia.org/wikipedia/commons/thumb/7/75/MakerBot_ThingOMatic_Bre_Pettis.jpg/220px-MakerBot_ThingOMatic_Bre_Pettis.jpg
Figure 2: A typical 3D printer. Source: Bre Pettis via Flickr

India is gradually growing with respect to its utilization of 3D printing technology. In 2014, the 3D printers market was at an early stage with just 200-500 combined workforce of engineers, designers and sales representatives. Currently, start-ups are springing up in places like Bangalore, Chennai, Mumbai, Visakhapatnam, etc and they are producing essential parts for sectors like the Indian Navy, Air Force, ISRO and the HAL.  India’s 3D printing market is projected to reach $79 million by the end of 2021, while the global market is at around $15.8 billion, which suggests that India has a lot of catching up to do.

Applications in the Aerospace and Defense Industry

The Aerospace and Defense Industries are keen to pursue additive manufacturing, mainly because of benefits such as weight reduction, cost cutting and to meet their highly specific requirements. The additive process uses less material to manufacture components and also ensures minimal waste of material. Overall reduced weightage means that less fuel would be used in aircrafts and hence result in better environmental compatibility. Let’s examine a few instances in India where 3D printing startups have assisted and provided the defense and aerospace sectors with unique solutions.

Recently, in 2020, the Centre-run defense company Hindustan Aeronautics Limited (HAL) had signed a MoU (Memorandum of Understanding) with Wipro 3D, the metal additive manufacturing branch of Wipro Infrastructure Engineering. The initiative would primarily focus on the design, development, testing, manufacturing, and repairing of aerospace components using metal additive technology. HAL is using 3D printing to manufacture engine components, although it also provides support to helicopter and rotary wing products. HAL also provides products to the Indian Army, Air Force, Navy, and Coast Guard. Speaking about this collaboration, Shekhar Shrivastava, CEO of the Bangalore division of HAL, said, “This initiative between HAL and Wipro 3D will create a unique synergy of capabilities that can accelerate the adoption of metal additive manufacturing in aerospace in India. Qualification of parts for aerospace is challenging as it would require prove out and extensive testing followed by certification by regulatory authorities which may also include flight testing."

Down south, Karnataka, which produces more than 65 percent of India’s aerospace-related components and exports, has taken a number of initiatives to promote additive manufacturing by setting up 3D printing clusters and sponsoring 3D printing startups. For example, through its flagship programme ‘Start Up Karnataka’, the State has given grants to ‘Deltasys E-Forming’, a Belgaum based start-up, to develop hybrid composite 3D printers. These initiatives are quite appropriate since two-thirds of India’s aircraft and helicopter manufacturing for the defense takes place in Karnataka, and 3D printing would revolutionize these processes quite rapidly.

On the other coast, Chennai-based 3D printing startup, Fabheads Automation, was established in 2015 by an ISRO engineer turned entrepreneur Dhinesh Kanagaraj. The deep tech startup designs and develops high-end carbon fibre helicopter blades for the Indian Air Force. Traditionally, carbon fibre parts are fabricated by laborious manual processes with a lot of fabrication time and money spent. Dhinesh also observed a lot of material wastage when he worked on carbon fibres at ISRO.  Based on this, Fabheads has designed an automated 3D printer series to eliminate material waste and also improve efficiency of production of carbon fibre. Sectors like the DRDO are currently approaching the company given these innovative methods of production.

3D Printing Saves the Day for the Indian Navy

Further, the Indian Navy has partnered with ‘think3D’, a Hyderabad-based 3D printing start-up, to produce spare components via additive manufacturing for both on and off-shore set-ups. The Indian Navy uses a lot of machinery on its ships which are imported from other countries and are quite old.  Whenever a component gets damaged, it is hard to replace it either because there is no availability of the part or because there is significant delay before a part is received. This often proved to be costly for the Navy since the machines would have to be kept idle before a spare part was replaced along with the fact that procurement of the parts was no less expensive.

This is where think3D had stepped in and supplied 3D printed parts to the Indian Navy, which were successfully tested and incorporated into its machinery. An example of such a 3D printed part, which proved to be of crucial help, is that of a centrifugal pump impeller- a key component for a ship’s operation.

https://3dprintingindustry.com/wp-content/uploads/2020/04/4.jpg
Figure 3: An original impeller (left) vs. a 3D printed impeller (right). Image source: think3D

The impeller is a rotating component and it is very important for a ship as it transfers energy from the motor to a fluid that needs to be pumped by accelerating the fluid outwards from the centre of rotation.  On ships, this component is used to import seawater into various parts of the ship for regular use of the crew. These impellers are required to rotate at high speeds for long durations and need to be very carefully designed. 3D printing was the best solution to replace these parts, given the speed of production and lower expenses.

Given all the benefits of 3D printing, it is high time for the Indian market to expand its 3D printing industry and utilize it to its full potential. There are many other instances like the one of the impeller in the Aerospace and Defense industries which can easily be solved using 3D printing.

Read More