Tuesday, June 23, 2020

The US-Taliban Deal: A ray of hope for the battered Afghans

This article is by

Share this article

Article Contributor(s)

Aditi Mohta

Article Title

The US-Taliban Deal: A ray of hope for the battered Afghans

Publisher

Global Views 360

Publication Date

June 23, 2020

URL

US Secretary of State Michael R. Pompeo participates in a signing ceremony in Doha, Qatar, on February 29, 2020

US Secretary of State Michael R. Pompeo participates in a signing ceremony in Doha, Qatar, on February 29, 2020 | Source: U.S. Department of State  via Wikimedia

On 11 September 2001, the attacks on the World Trade Centre and Pentagon in America killed over 3000 people for which Osama Bin Laden, the head of Al-Qaeda, claimed responsibility.. Osama Bin Laden was based in Afghanistan during this attack and was protected by the government of the day which was run by the radical Islamist group Taliban. Even after the repeated demands from the USA government, Taliban refused to hand over Osama bin Laden to the USA. 

George W. Bush, the president of America at that point of time, announced the first airstrikes against Afghanistan on 7 October 2001. As other countries joined in, the Taliban were quickly removed from power and a new pro-western government was installed. The new government, however, was never able to run its writ over the whole country. The Taliban regrouped and started gaining influence in the vast rural areas and continuously attacked the US-led international military coalition as well as Afghan forces. From that point onward, the U.S. and its allies have battled to stop Afghanistan's administration crumbling and to end attacks by the Taliban. 

After more than eighteen years of war in Afghanistan, on 29 February 2020, the United States and Taliban signed a peace deal which was the first step in ending the war. The agreement was signed in the Qatari capital Doha between Talibani political chief Mullah Abdul Ghani Baradar and U.S. special envoy Zalmay Khalilzad. The U.S. Defence Secretary Mark Esper said that signing of the accord would be a good step to end the war, the road ahead would not be secure. There would be a full withdrawal of all U.S. and coalition forces from Afghanistan within 14 months since the signing of the deal. The Taliban promised to cut ties with Al Qaeda and keep fighting the militant Islamic State group.  

What is in the peace agreement?

The peace agreement was signed after nine rounds of discussion and it contains four main points: cease-fire, withdrawal of foreign forces, intra-Afghan negotiations, and counter-terrorism assurances. 

  1. Cease-fire: The negotiators agreed to a temporary reduction in violence. They said that a permanent and comprehensive cease-fire will be an item on the agenda of the intra-Afghan dialogue and negotiations. 
  2. Withdrawal of foreign forces: Within the first 135 days, the U.S. will reduce its troops in Afghanistan from roughly 12,000 to 8,600, along with the allies of the U.S. also withdrawing their forces proportionately. If the Taliban follows through all the commitments that in the peace deal, all the U.S. troops along with the allies' troops will leave Afghanistan within fourteen months. 
  3. Counter-terrorism assurances: The United States invaded Afghanistan after the 9/11 attacks, mainly to eliminate the threat of terrorism and halt terrorist activities in the country. As a part of the agreement, the Taliban guaranteed that Afghanistan would not be used by any of its members or terrorist groups to threaten the security of the U.S. and its allies. 
  4. Intra-Afghan negotiations: The reason behind the intra-Afghan talks is to bring together negotiators from the Taliban and Afghan government. The peace deal also calls for an exchange of prisoners before the intra-Afghan negotiations. The intra-Afghan talks which were supposed to take place in March 2020, have been delayed. 

Challenges to the peace deal

While this deal can be seen as a stepping stone towards a more comprehensive agreement, many difficulties may come in the way. 

The United States and the Taliban had consented to the arrival of up to 5000 Taliban prisoners in return for up to one thousand Afghan security forces. However, the Afghan government said that it had not agreed on such an exchange. The process can become difficult due to a weak central government along with ethnic, tribal and sectarian differences. At the same time, many people say that the Taliban has gotten more than it gave up. 

Through the deal, the Taliban got their primary wish: removal of American troops from Afghanistan. Yet, they had failed to be specific about the civil rights that they had repressed when they were in power. The insurgents pledged to keep international terrorist groups like Al Qaeda from using Afghanistan as their base for attacks. 

The United States promised to work towards the gradual removal of Taliban leaders from the sanction blacklists of America and the United Nations. At the same time, the experts say that the Taliban is stronger than ever at this point. It controls many districts throughout the country and continues to launch significant attacks including in Kabul and on Afghan security forces. 

The peace process is also faced by the problem of the illegal drug trade. According to Afghan officials, more than 20 terrorist groups still operate inside the country, which is another threat to the deal. By signing the agreement, the U.S. and the Taliban state their commitment to reduce violence and not attack each other. What remains a worry is how much and how long the Taliban will hold fire on Afghan security forces before the cease-fire is finally reached in Afghan negotiations.

Sources that were used:

  1. https://www.nytimes.com/2020/02/29/world/asia/us-taliban-deal.html
  2. http://diplomatist.com/2020/05/16/us-taliban-peace-deal-and-its-implications-for-central-asia/
  3. https://www.aljazeera.com/indepth/interactive/2020/02/war-afghanistan-2001-invasion-2020-taliban-deal-200229142658305.html
  4. https://www.bbc.com/news/world-asia-51689443
  5. https://www.dawn.com/news/1529415
  6. https://www.cfr.org/backgrounder/us-taliban-peace-deal-agreement-afghanistan-war
  7. https://www.aljazeera.com/news/2020/02/afghanistan-taliban-sign-deal-america-longest-war-200213063412531.html
  8. https://www.dawn.com/news/1537384
  9. https://www.washingtonpost.com/context/u-s-taliban-peace-deal/7aab0f58-dd5c-430d-9557-1b6672d889c3/?itid=lk_inline_manual_3

Support us to bring the world closer

To keep our content accessible we don't charge anything from our readers and rely on donations to continue working. Your support is critical in keeping Global Views 360 independent and helps us to present a well-rounded world view on different international issues for you. Every contribution, however big or small, is valuable for us to keep on delivering in future as well.

Support Us

Share this article

Read More

July 19, 2021 11:59 AM

3D Printing: The direction to go for the Indian Defense and Aerospace Industries

3D printing is the next big game-changer on the technological front, almost a revolution if you will. 3D printing, also known as additive manufacturing, is a process of creating three-dimensional objects by layering two-dimensional cross sections on top of one another. The two-dimensional cross sections are computer-designed and rendered, which makes it all the more advanced. From Aerospace to Defense and Medical to Automotive, products manufactured via 3D printing are spreading their reach in the markets quite swiftly. This article will take a look at how 3D printing is beneficial and how the technology can transform the Indian and Defense and Aerospace sectors once utilized to its full potential.

Additive manufacturing has the power to unlock a wide range of opportunities. It uses a 3D printer to create a layer-by-layer “addition” of material which is digitally constructed. Different types of materials which are currently being used for the same are metals, ceramics, special plastics, synthetic resins, and etc. 3D printing not only reduces the cost of production of various components but also gives the power to manufacture locally with design flexibility. The technology significantly speeds the process of designing; this is mainly because there is no requirement of tools. Traditional manufacturing usually takes months to either acquire necessary tools and further produce parts and components or import components from various places. However, once 3D printers are acquired, which they might be costly in themselves, they would ensure a smoother production process. Hence, due to the combination of localized manufacturing and no tools, tailor-made designs can be produced to match the necessities of various industries.  

https://upload.wikimedia.org/wikipedia/commons/thumb/7/75/MakerBot_ThingOMatic_Bre_Pettis.jpg/220px-MakerBot_ThingOMatic_Bre_Pettis.jpg
Figure 2: A typical 3D printer. Source: Bre Pettis via Flickr

India is gradually growing with respect to its utilization of 3D printing technology. In 2014, the 3D printers market was at an early stage with just 200-500 combined workforce of engineers, designers and sales representatives. Currently, start-ups are springing up in places like Bangalore, Chennai, Mumbai, Visakhapatnam, etc and they are producing essential parts for sectors like the Indian Navy, Air Force, ISRO and the HAL.  India’s 3D printing market is projected to reach $79 million by the end of 2021, while the global market is at around $15.8 billion, which suggests that India has a lot of catching up to do.

Applications in the Aerospace and Defense Industry

The Aerospace and Defense Industries are keen to pursue additive manufacturing, mainly because of benefits such as weight reduction, cost cutting and to meet their highly specific requirements. The additive process uses less material to manufacture components and also ensures minimal waste of material. Overall reduced weightage means that less fuel would be used in aircrafts and hence result in better environmental compatibility. Let’s examine a few instances in India where 3D printing startups have assisted and provided the defense and aerospace sectors with unique solutions.

Recently, in 2020, the Centre-run defense company Hindustan Aeronautics Limited (HAL) had signed a MoU (Memorandum of Understanding) with Wipro 3D, the metal additive manufacturing branch of Wipro Infrastructure Engineering. The initiative would primarily focus on the design, development, testing, manufacturing, and repairing of aerospace components using metal additive technology. HAL is using 3D printing to manufacture engine components, although it also provides support to helicopter and rotary wing products. HAL also provides products to the Indian Army, Air Force, Navy, and Coast Guard. Speaking about this collaboration, Shekhar Shrivastava, CEO of the Bangalore division of HAL, said, “This initiative between HAL and Wipro 3D will create a unique synergy of capabilities that can accelerate the adoption of metal additive manufacturing in aerospace in India. Qualification of parts for aerospace is challenging as it would require prove out and extensive testing followed by certification by regulatory authorities which may also include flight testing."

Down south, Karnataka, which produces more than 65 percent of India’s aerospace-related components and exports, has taken a number of initiatives to promote additive manufacturing by setting up 3D printing clusters and sponsoring 3D printing startups. For example, through its flagship programme ‘Start Up Karnataka’, the State has given grants to ‘Deltasys E-Forming’, a Belgaum based start-up, to develop hybrid composite 3D printers. These initiatives are quite appropriate since two-thirds of India’s aircraft and helicopter manufacturing for the defense takes place in Karnataka, and 3D printing would revolutionize these processes quite rapidly.

On the other coast, Chennai-based 3D printing startup, Fabheads Automation, was established in 2015 by an ISRO engineer turned entrepreneur Dhinesh Kanagaraj. The deep tech startup designs and develops high-end carbon fibre helicopter blades for the Indian Air Force. Traditionally, carbon fibre parts are fabricated by laborious manual processes with a lot of fabrication time and money spent. Dhinesh also observed a lot of material wastage when he worked on carbon fibres at ISRO.  Based on this, Fabheads has designed an automated 3D printer series to eliminate material waste and also improve efficiency of production of carbon fibre. Sectors like the DRDO are currently approaching the company given these innovative methods of production.

3D Printing Saves the Day for the Indian Navy

Further, the Indian Navy has partnered with ‘think3D’, a Hyderabad-based 3D printing start-up, to produce spare components via additive manufacturing for both on and off-shore set-ups. The Indian Navy uses a lot of machinery on its ships which are imported from other countries and are quite old.  Whenever a component gets damaged, it is hard to replace it either because there is no availability of the part or because there is significant delay before a part is received. This often proved to be costly for the Navy since the machines would have to be kept idle before a spare part was replaced along with the fact that procurement of the parts was no less expensive.

This is where think3D had stepped in and supplied 3D printed parts to the Indian Navy, which were successfully tested and incorporated into its machinery. An example of such a 3D printed part, which proved to be of crucial help, is that of a centrifugal pump impeller- a key component for a ship’s operation.

https://3dprintingindustry.com/wp-content/uploads/2020/04/4.jpg
Figure 3: An original impeller (left) vs. a 3D printed impeller (right). Image source: think3D

The impeller is a rotating component and it is very important for a ship as it transfers energy from the motor to a fluid that needs to be pumped by accelerating the fluid outwards from the centre of rotation.  On ships, this component is used to import seawater into various parts of the ship for regular use of the crew. These impellers are required to rotate at high speeds for long durations and need to be very carefully designed. 3D printing was the best solution to replace these parts, given the speed of production and lower expenses.

Given all the benefits of 3D printing, it is high time for the Indian market to expand its 3D printing industry and utilize it to its full potential. There are many other instances like the one of the impeller in the Aerospace and Defense industries which can easily be solved using 3D printing.

Read More