Sunday, July 26, 2020

Suppressing the Minority Voting: An effective discrimination tactic of the US Conservatives

This article is by

Share this article

Article Contributor(s)

Nikhita Gautam

Article Title

Suppressing the Minority Voting: An effective discrimination tactic of the US Conservatives

Publisher

Global Views 360

Publication Date

July 26, 2020

URL

Protester at George Floyd protest in USA

Protester at  George Floyd protest in USA | Source: Clay Banks via Unsplash

The recent protests over George Floyd’s death and reactions of the conservatives against the protest laid bare the systemic injustice and oppression faced by the people of color in the USA.

The other, albeit invisible form of discrimination perpetuated by the conservative political establishment in the USA is “Minority Voter Suppression”.

Though it may seem improbable that long after the Jim Crow laws are junked and Civil Right Laws are in place, the effort to disenfranchise the Black people is still going on.

The major piece of legislation which protected minorities from electoral exploitation was the Voter Registration Act which underpins the basic ideal of a universal adult franchise by specifically addressing and combating voting discrimination.

To ensure the representation to minority communities, this act mandated that “At-Large Elections”, where the whole of the jurisdiction elects all of the city council, were replaced by the single member districts in which each community selects a person to represent them in the city council.

It was also prohibited to draw the voting district in such a way that  minorities could be clubbed in only a few of the districts. It was also made mandatory for those states which have a history of discrimination to get pre-clearance from the justice department before changing their voting laws.

This law, however, lost its power in a process which began in 1980. In 1980 the Supreme Court ruled that at-large elections were not unconstitutional, on their own. In 1995, the Court began restricting the construction of majority minority districts on grounds that it segregates people on the basis of race.

In 2008, the court ruled that a photo voter ID law in Indiana was constitutional and was in state interest to protect against voter fraud (research shows that photo voter IDs provide disincentive to vote for people of color). The voter ID law requires the voters to have a government-issued photo ID to cast a ballot.

In 2013, the Supreme Court scrapped the part of the law which stated that some states (which had an alleged history of discrimination) needed federal preclearance in any changes of their voting laws, meaning that the state laws would need approval from the federal government before being put into practice. This was done so citing that the methods which determined discriminatory states were invalid.

All of these slowly chipped away at the laws, and especially the 2013 Shelby County vs Holder case which led to a host of issues whVoter Suppression is Still One of the Greatest Obstacles to a More Just Americaich directly/indirectly keep a significant proportion of minorities from voting. Few of such actions are closure or relocation of precincts in majority black areas, purge of minority voters from the voter lists, and elimination of Sunday early voting days which are preferred by black voters.

There have been attempts to restrict registration drives in Tennessee on the basis that many of the forms were incomplete.

There have also been laws enacted which needed people to participate regularly in elections to keep their voting rights and reply to a letter sent to their residence, which makes it difficult for Black and Hispanics due to obscure areas and the fact that they’re half as likely than other people to get a day off work to vote.

The governor of Georgia, Brian Kemp, has been accused of using intimidation tactics to scare minority communities.

In Texas, the acting secretary of state said that he had a list of 95,000 non-citizens who were registered for voting in the state, and 58,000 of them had already cast a vote. That claim was proven untrue when it was noted that there were tens of thousands of people who were naturalized citizens.

In many states, felons are not allowed to vote even after they have served their sentence, and in Florida felons are allowed to vote only if they have paid an array of fees after serving their sentence, which sets an economic bar on their ability to vote.

This is evident that forces working against the equal rights for the minority communities are still working at full force to reverse the gains of civil right movements. The fight for the unhindered voting rights for the minority communities in the USA at the social, political, and judicial front will continue in the foreseeable future.

Support us to bring the world closer

To keep our content accessible we don't charge anything from our readers and rely on donations to continue working. Your support is critical in keeping Global Views 360 independent and helps us to present a well-rounded world view on different international issues for you. Every contribution, however big or small, is valuable for us to keep on delivering in future as well.

Support Us

Share this article

Read More

July 19, 2021 11:59 AM

3D Printing: The direction to go for the Indian Defense and Aerospace Industries

3D printing is the next big game-changer on the technological front, almost a revolution if you will. 3D printing, also known as additive manufacturing, is a process of creating three-dimensional objects by layering two-dimensional cross sections on top of one another. The two-dimensional cross sections are computer-designed and rendered, which makes it all the more advanced. From Aerospace to Defense and Medical to Automotive, products manufactured via 3D printing are spreading their reach in the markets quite swiftly. This article will take a look at how 3D printing is beneficial and how the technology can transform the Indian and Defense and Aerospace sectors once utilized to its full potential.

Additive manufacturing has the power to unlock a wide range of opportunities. It uses a 3D printer to create a layer-by-layer “addition” of material which is digitally constructed. Different types of materials which are currently being used for the same are metals, ceramics, special plastics, synthetic resins, and etc. 3D printing not only reduces the cost of production of various components but also gives the power to manufacture locally with design flexibility. The technology significantly speeds the process of designing; this is mainly because there is no requirement of tools. Traditional manufacturing usually takes months to either acquire necessary tools and further produce parts and components or import components from various places. However, once 3D printers are acquired, which they might be costly in themselves, they would ensure a smoother production process. Hence, due to the combination of localized manufacturing and no tools, tailor-made designs can be produced to match the necessities of various industries.  

https://upload.wikimedia.org/wikipedia/commons/thumb/7/75/MakerBot_ThingOMatic_Bre_Pettis.jpg/220px-MakerBot_ThingOMatic_Bre_Pettis.jpg
Figure 2: A typical 3D printer. Source: Bre Pettis via Flickr

India is gradually growing with respect to its utilization of 3D printing technology. In 2014, the 3D printers market was at an early stage with just 200-500 combined workforce of engineers, designers and sales representatives. Currently, start-ups are springing up in places like Bangalore, Chennai, Mumbai, Visakhapatnam, etc and they are producing essential parts for sectors like the Indian Navy, Air Force, ISRO and the HAL.  India’s 3D printing market is projected to reach $79 million by the end of 2021, while the global market is at around $15.8 billion, which suggests that India has a lot of catching up to do.

Applications in the Aerospace and Defense Industry

The Aerospace and Defense Industries are keen to pursue additive manufacturing, mainly because of benefits such as weight reduction, cost cutting and to meet their highly specific requirements. The additive process uses less material to manufacture components and also ensures minimal waste of material. Overall reduced weightage means that less fuel would be used in aircrafts and hence result in better environmental compatibility. Let’s examine a few instances in India where 3D printing startups have assisted and provided the defense and aerospace sectors with unique solutions.

Recently, in 2020, the Centre-run defense company Hindustan Aeronautics Limited (HAL) had signed a MoU (Memorandum of Understanding) with Wipro 3D, the metal additive manufacturing branch of Wipro Infrastructure Engineering. The initiative would primarily focus on the design, development, testing, manufacturing, and repairing of aerospace components using metal additive technology. HAL is using 3D printing to manufacture engine components, although it also provides support to helicopter and rotary wing products. HAL also provides products to the Indian Army, Air Force, Navy, and Coast Guard. Speaking about this collaboration, Shekhar Shrivastava, CEO of the Bangalore division of HAL, said, “This initiative between HAL and Wipro 3D will create a unique synergy of capabilities that can accelerate the adoption of metal additive manufacturing in aerospace in India. Qualification of parts for aerospace is challenging as it would require prove out and extensive testing followed by certification by regulatory authorities which may also include flight testing."

Down south, Karnataka, which produces more than 65 percent of India’s aerospace-related components and exports, has taken a number of initiatives to promote additive manufacturing by setting up 3D printing clusters and sponsoring 3D printing startups. For example, through its flagship programme ‘Start Up Karnataka’, the State has given grants to ‘Deltasys E-Forming’, a Belgaum based start-up, to develop hybrid composite 3D printers. These initiatives are quite appropriate since two-thirds of India’s aircraft and helicopter manufacturing for the defense takes place in Karnataka, and 3D printing would revolutionize these processes quite rapidly.

On the other coast, Chennai-based 3D printing startup, Fabheads Automation, was established in 2015 by an ISRO engineer turned entrepreneur Dhinesh Kanagaraj. The deep tech startup designs and develops high-end carbon fibre helicopter blades for the Indian Air Force. Traditionally, carbon fibre parts are fabricated by laborious manual processes with a lot of fabrication time and money spent. Dhinesh also observed a lot of material wastage when he worked on carbon fibres at ISRO.  Based on this, Fabheads has designed an automated 3D printer series to eliminate material waste and also improve efficiency of production of carbon fibre. Sectors like the DRDO are currently approaching the company given these innovative methods of production.

3D Printing Saves the Day for the Indian Navy

Further, the Indian Navy has partnered with ‘think3D’, a Hyderabad-based 3D printing start-up, to produce spare components via additive manufacturing for both on and off-shore set-ups. The Indian Navy uses a lot of machinery on its ships which are imported from other countries and are quite old.  Whenever a component gets damaged, it is hard to replace it either because there is no availability of the part or because there is significant delay before a part is received. This often proved to be costly for the Navy since the machines would have to be kept idle before a spare part was replaced along with the fact that procurement of the parts was no less expensive.

This is where think3D had stepped in and supplied 3D printed parts to the Indian Navy, which were successfully tested and incorporated into its machinery. An example of such a 3D printed part, which proved to be of crucial help, is that of a centrifugal pump impeller- a key component for a ship’s operation.

https://3dprintingindustry.com/wp-content/uploads/2020/04/4.jpg
Figure 3: An original impeller (left) vs. a 3D printed impeller (right). Image source: think3D

The impeller is a rotating component and it is very important for a ship as it transfers energy from the motor to a fluid that needs to be pumped by accelerating the fluid outwards from the centre of rotation.  On ships, this component is used to import seawater into various parts of the ship for regular use of the crew. These impellers are required to rotate at high speeds for long durations and need to be very carefully designed. 3D printing was the best solution to replace these parts, given the speed of production and lower expenses.

Given all the benefits of 3D printing, it is high time for the Indian market to expand its 3D printing industry and utilize it to its full potential. There are many other instances like the one of the impeller in the Aerospace and Defense industries which can easily be solved using 3D printing.

Read More