Monday, January 25, 2021

Looking back at Babri Masjid Demolition through “Ram Ke Naam”

This article is by

Share this article

Article Contributor(s)

Ashutosh Gudi

Article Title

Looking back at Babri Masjid Demolition through “Ram Ke Naam”

Publisher

Global Views 360

Publication Date

January 25, 2021

URL

Ram ke Naam documentary begins

Ram ke Naam documentary begins

India has been a secular state ever since Independence (1947). But as religious fundamentalist influence grows over the masses of India, the nation's secular fabric gets threatened. One of the most crucial case in point is the demolition of the 16th century mosque in Ayodhya, known as the "Babri Masjid"—which is celebrated by the Hindu Nationalists of India.

Babri Masjid is believed to be constructed by Mughal Emperor, Babur. The Vishwa Hindu Parishad (VHP) claims that the mosque was built at the birth-site of the Lord Ram on the orders of Babur—after razing a pre-existing Ram temple. They are determined to build a new Ram temple on the same site.

This controversial issue, which recently, in 2019, came to yet a controversial conclusion after several successive governments failed to resolve it—has led to many religious riots, costing thousands of lives, culminating in the mosque's destruction by militant Hindu 'Karsevaks', allegedly under VHP leadership, in December of 1992. The religious violence that followed, spread throughout India, leaving more than 5,000 dead, and causing thousands of Muslims to flee their homes.

In this essay, I look at what happened in Ayodhya through analyzing Anand Patwardhan's "Ram Ke Naam"—also known as—"In the Name of God"—a documentary that covers the campaign waged by the quasi-militant Vishwa Hindu Parishad (VHP)—to destroy Babri Masjid.

Filmed prior to the mosque's demolition, Ram Ke Naam examines the motivations which would ultimately lead to the drastic actions of Hindu nationalists, as well as the efforts of secular Indians—many of whom are Hindus as well—to combat the religious intolerance and hatred that has seized India in the name of God.

Ram Ke Naam is an investigative documentary which studies—through multiple interviews—the happenings at Ayodhya around the Babri Masjid, how this controversy surrounding it began. It attempts to understand the collective mindset of Hindu nationalists—why they wish that a Ram temple should be built at the site of the Babri masjid and what they feel about the communal riots that have been caused due to the controversy.

Concurrently, the documentary also attempts to understand the opinions of people who oppose the VHP’s Ram temple campaign. It contains anecdotes about how this campaign affected the poor, the lower castes, and the untouchables as well—thus making a clear contrast between the opinions and experiences of people from privileged upper castes (particularly those who support the campaign) and the the people from underprivileged groups viz. lower castes, untouchables, and Muslims. The film mainly highlights 4 aspects of this controversy—politicisation of religion, communalism, religious fundamentalism, and classism/casteism. I intend to analyse this film on these lines.

Ram Ke Naam featuring with an image of the Babri Mosque

The Babri masjid was built in 1528, in Ayodhya. Circa 1580, Tulsidas wrote Ramcharitmanas, making the legend of Lord Ram available to a larger audience—while incorporating vernacular language. By the 19th century, the city of Ayodhya, due to it being the birthplace of Lord Ram—as stated in the Ramcharitamanas—was filled with Ram temples. Interestingly, a huge chunk of the Ram temples claimed itself to be the very site of Lord Ram’s birth. This period was contemporaries with the Indian Subcontinent under British colonial rule. The Britshers, as they implemented their “divide and rule” strategy, are often quoted spreading the rumour that the Babri masjid was the very site of Lord Ram’s birth, and that the mosque was built by Babur after razing an existing Ram temple that existed there.

This led to communal tensions among Indians, but it was short-lived, and through mutual compromise, people maintained communal harmony by agreeing to worship their gods side-by-side, in the same site itself. It was not until December 1949, when the next controversy surrounding the mosque arose. Some militant Hindu nationalists from the Akhil Bhartiya Ramayana Mahasabha, secretly placed idols of the Hindu deity inside the mosque, making it look like God Ram had made a divine appearance, to agitate Hindu possession of the site—leading to communal tensions. The state government ordered the removal of the idols, which the local police refused to do citing that it could lead to riots. KK Nayar, who was the district magistrate then, decided that until a decision from the courts comes, the mosque shall be locked and no one can access it. Yet, Hindu nationalists still demanded that a grand Ram temple should be built at the site of the Babri masjid (after razing the Masjid), regardless of whatever the courts decide.

Ram Ke Naam featuring a propaganda poster with the image of BJP leader L.K. Advani

The film begins with a shot of a political campaign poster [of the Bharatiya Janata Party (BJP)] featuring the Hindu warrior-king deity, Lord Ram, in large size, standing over/behind the imagined-by-all Ram Temple. The poster also features Lal Krishna Advani—the president of BJP. We hear Advani giving his speech in the background, “I appeal to you, Ram Jyoti (the divine light of Ram) will give you all the inspiration needed for the betterment of the life; all what is needed for the betterment of life is only Ram; if there is no Ram, there is no survival”. Advani, as a politician, or BJP, as a political party, appealing to the public with religious promises is a classic example of politicisation of religion. Politics—in purely electoral context—is a competition where parties race for the support of the people (which gives them access to power) by attending to their various demands and interests.

There are various subjects of interest, as far as people are concerned, over which politics can be played—like employment and food security. While these are valid subjects of interest, emanating from the masses themselves, it is also possible to create interests. Both valid and/or vested, by political parties. In the case of politicisation of religion, Hindu religion being given a political identity (instead of leaving it for what it is, i.e., religion of faith), to serve a political agenda of Hindu Rashtra—the raison d’etre of BJP—is a classic example of creation of vested, (but not valid), interests.

The film shows why the VHP’s campaign is backed by the BJP. In the film, while interviewing some youth from the Bajarangdal—yet, another militant Hindu nationalist organisation—a youth revealed that the VHP, Bajarangdal and the BJP are all family organisations of one organisation—the Rashtriya Swayamsevak Sangh (RSS), and that Bajarangdal was the youth-wing of the VHP. The RSS—founded in 1925—is a Hindu nationalist organisation, and is the ideological wing of the BJP. The RSS has many “family organisations” since the 1930s, and today, the Family of the RSS, also known as the “Sangh Pariwar” the VHP, the BJP, and the Bajarangdal are some of the most prominent members of the family.

While the BJP (1980) is the electoral/political wing of the RSS, the VHP (1964) serves as a church-like establishment to represent the Hindu religion. As far as BJP is concerned, it served as the Hindu nationalist alternative to the rather popular, secular party, the Congress party. BJP was created by the RSS as a way of recruiting people into the Hindu nationalist fold, after it was banned as an organisation during Indira Gandhi’s National Emergency. Through BJP, RSS as well was able to upgrade its activities. RSS did (does) so by choosing senior former pracharaks (full time workers in the RSS) who are highly trained by the RSS, and placing them at the highest positions of decision making in the BJP. LK Advani, the then president of the BJP, was himself a pracharak in the RSS, before joining BJP, and the former BJP Prime Minister Atal Bihari Vajpayee as well was a pracharak. While the BJP did political campaigns; VHP did its own religious campaigns where it used different forms of imagery to influence people.

Coming back to the film, one instance shows some men crowding around a television to watch the telecast of a film produced by the VHP that depicts the supposed divine appearance of God Ram inside the Babri Masjid, on the night of December 23rd, 1949. It does so—so dramatically—that it perhaps, hypnotises those watching it. Not only this instance, in 1987, the broadcast of the Ramayana television series (based on Tulsidas’s Ramcharitamanas) as well did contribute to VHP’s Hindu nationalist cause. It further popularized the deity, reinforcing that God Ram was born in Ayodhya, (the place where Babri Masjid is located), and presenting Ram with the Hindu nationalist interpretation—as a warrior-God. Around 300 versions of Ramayana exist, yet, the one broadcasted on TV presented a very conservative and a masculinist interpretation.

As recorded in the film, LK Advani’s Rath Yatra to Ayodhya, starts from Somnath, Gujarat. I understand this is because in around 1950 the Government of India—notwithstanding claims to secularism and pluralism—assisted the renovation of a Hindu temple at Somnath. This temple was said to have been destroyed by Muslims during their rule. In 1951, at the inauguration of the temple, President Rajendra Prasad stated in his speech that this was a historic day, for India had “washed away the stigma of one thousand years of slavery”, this statement of his has been widely interpreted to mean that India was now finally free from a period of a thousand years of slavery, period of Muslim and British rule combined. Thus, this official act, by the President of India himself, of equating mosque with Muslim rule, thus slavery of Hindus, made it symbolic enough to start the Rath Yatra from Somnath itself.

Pujari Laldas in Ram Ke Naam

The court appointed priest for the Ram (Janmabhoomi) temple, Pujari Laldas seems to be the very voice of this documentary. His character seems to be the very message that this documentary is trying to construct and put across to its viewers. Laldas counters and criticizes the kind of religious fundamentalism that has swallowed the masses into itself, and dismisses the whole relevance of the controversy. He comments on the VHP’s real intentions in this controversy, and exposes it for not really genuinely believing in the cause they are so committed to. He says that this whole issue that the VHP has is making a "hype" out of is just a political “game” for achieving economic and political power, and this issue never really was about a temple. He reveals that the VHP has not once made a single offering or prayed at the Janmabhoomi shrine, yet the fight for a Ram temple. He says that there is no need for another temple, because in the Hindu (religion as a faith) culture, wherever there is a God present is considered a temple; even if there was a need for another temple, demolishing a place of worship to build another is unnecessary and wrong. He says that those who want to demolish the mosque just want to create communal tensions and collect Hindu votes—they don’t care if a genocide happens in the process. He explains that religious fundamentalists have very conveniently forgotten that there has always been unity among Hindus and Muslims, no trouble has been caused by anyone since 1949, people have been living in harmony, worshiping their respective gods side-by-side, and also that many temples with Ayodhya itself are built by Muslims, some of whom are a gesture of apology from their ancestors for the tyranny caused by their ancestors. He questions the purpose of the very proposed temple itself – at what cost should a temple be built? Why can’t the temple funds be used to aid the poor, like Mother Teressa does (did), is that not the legacy of God Ram, rather than the Hindu nationalist connotation he has been given? It’s a shame that such a bright ray of light in such darkness, saint-like Pujari Laldas, was murdered. While his murder was termed as a case of a simple land dispute, its rather obvious that it really was something else, that it was a case of revenge by Hindu fundamentalists, sanctioned by the state.

Another moving aspect of the film was the interview of the income tax officer, Vishwa Bandhu Gupta, who was victimised for doing his job too honestly and religiously. Vishwa Bandhu Gupta was investigating the VHP for tax scams, and he was suspended for sticking his neck down too deep. He was looking at where the VHP was getting its funding from even after being denied permission from the Reserve Bank of India to receive funds from foreign investors. He was stopped in the middle of his operation, transferred to Madras (Chennai), and the entire investigation was quashed in no time. He was even threatened with his life by 2 Hindu nationalists he refused to name. The disappointed and tearful look on his face as the camera zoomed into it was painful to see, it was as though the proverbial lump in his throat (the existence of which seemed rather obvious in the film, given the unstable emotional look on his face), was getting transferred into my own, as the viewer of this documentary.

At last, the class/caste aspects that this film covers in this controversy. In the entire film, we see that every Hindu nationalist the filmmakers come across/meet is a privileged upper caste Hindu, not one of them is a lower caste person or an untouchable. Whereas those on the side of the streets, on the farms, all of them happen to be poor and/or lower caste or untouchables. On interviewing them, many of them either have no clue as to what is going on, what this controversy is, or just don’t care about the controversy, because it in no way benefits them, and they feel it is only a waste of time because they have immediate responsibilities like feeding their families, and surviving. There was no show of any communal hatred. Yet, all of them expressed that they still faced caste-oppression. One Dalit woman, named Bhavandevi, who was interviewed in the film, said that her people aren’t even allowed anywhere near temples. With that said, why would she support the Ram temple cause? It shows that among these very Hindu nationalists who talk about Hindu unity, there exists a great deal of classism and casteism, and hypocrisy.

As the film comes to end, we see Pujari Laldas reciting a doha from Ramayana itself, “when the rains are heavy, and the grass grows so tall that its difficult to see the right path the same way when charlatans speak so much and so loudly that the truth gets hidden, you experience chaos, disorder, frenzy, madness. But these rains are short-lived, so, when the rains stop and the right path becomes visible and clear, you proceed in the right direction, the direction of reason”. This doha signifies that while the country is in turmoil today, we must not lose hope, for these heavy rains will soon end, and peace will be restored in the country again. The film then concludes with Bhavandevi saying that the temple is of no use to her and her people, when they aren’t even allowed anywhere near it in the first place – if an idol of a deity breaks, it may be replaced with another one; but when a living body gets torn apart during violence, with what will it replaced? Bhavandevi says that she is human, too, yet she is treated differently by people of her own race; her village is a birthplace to many of her kind, Untouchables, and they are being wrongly evicted—then there is a Ram whose birthplace everyone is after—why should she run after it, too?

Ram Ke Naam by the end of the film, asks the following important, yet difficult questions: why is it that people blind in their love for god forget what their god really preaches and become so vulnerable to leaders who preach hate and mislead, all in the name of God? Why is it that people confuse reason with blasphemy?

Edited by Global Views 360 team

Support us to bring the world closer

To keep our content accessible we don't charge anything from our readers and rely on donations to continue working. Your support is critical in keeping Global Views 360 independent and helps us to present a well-rounded world view on different international issues for you. Every contribution, however big or small, is valuable for us to keep on delivering in future as well.

Support Us

Share this article

Read More

July 19, 2021 11:59 AM

3D Printing: The direction to go for the Indian Defense and Aerospace Industries

3D printing is the next big game-changer on the technological front, almost a revolution if you will. 3D printing, also known as additive manufacturing, is a process of creating three-dimensional objects by layering two-dimensional cross sections on top of one another. The two-dimensional cross sections are computer-designed and rendered, which makes it all the more advanced. From Aerospace to Defense and Medical to Automotive, products manufactured via 3D printing are spreading their reach in the markets quite swiftly. This article will take a look at how 3D printing is beneficial and how the technology can transform the Indian and Defense and Aerospace sectors once utilized to its full potential.

Additive manufacturing has the power to unlock a wide range of opportunities. It uses a 3D printer to create a layer-by-layer “addition” of material which is digitally constructed. Different types of materials which are currently being used for the same are metals, ceramics, special plastics, synthetic resins, and etc. 3D printing not only reduces the cost of production of various components but also gives the power to manufacture locally with design flexibility. The technology significantly speeds the process of designing; this is mainly because there is no requirement of tools. Traditional manufacturing usually takes months to either acquire necessary tools and further produce parts and components or import components from various places. However, once 3D printers are acquired, which they might be costly in themselves, they would ensure a smoother production process. Hence, due to the combination of localized manufacturing and no tools, tailor-made designs can be produced to match the necessities of various industries.  

https://upload.wikimedia.org/wikipedia/commons/thumb/7/75/MakerBot_ThingOMatic_Bre_Pettis.jpg/220px-MakerBot_ThingOMatic_Bre_Pettis.jpg
Figure 2: A typical 3D printer. Source: Bre Pettis via Flickr

India is gradually growing with respect to its utilization of 3D printing technology. In 2014, the 3D printers market was at an early stage with just 200-500 combined workforce of engineers, designers and sales representatives. Currently, start-ups are springing up in places like Bangalore, Chennai, Mumbai, Visakhapatnam, etc and they are producing essential parts for sectors like the Indian Navy, Air Force, ISRO and the HAL.  India’s 3D printing market is projected to reach $79 million by the end of 2021, while the global market is at around $15.8 billion, which suggests that India has a lot of catching up to do.

Applications in the Aerospace and Defense Industry

The Aerospace and Defense Industries are keen to pursue additive manufacturing, mainly because of benefits such as weight reduction, cost cutting and to meet their highly specific requirements. The additive process uses less material to manufacture components and also ensures minimal waste of material. Overall reduced weightage means that less fuel would be used in aircrafts and hence result in better environmental compatibility. Let’s examine a few instances in India where 3D printing startups have assisted and provided the defense and aerospace sectors with unique solutions.

Recently, in 2020, the Centre-run defense company Hindustan Aeronautics Limited (HAL) had signed a MoU (Memorandum of Understanding) with Wipro 3D, the metal additive manufacturing branch of Wipro Infrastructure Engineering. The initiative would primarily focus on the design, development, testing, manufacturing, and repairing of aerospace components using metal additive technology. HAL is using 3D printing to manufacture engine components, although it also provides support to helicopter and rotary wing products. HAL also provides products to the Indian Army, Air Force, Navy, and Coast Guard. Speaking about this collaboration, Shekhar Shrivastava, CEO of the Bangalore division of HAL, said, “This initiative between HAL and Wipro 3D will create a unique synergy of capabilities that can accelerate the adoption of metal additive manufacturing in aerospace in India. Qualification of parts for aerospace is challenging as it would require prove out and extensive testing followed by certification by regulatory authorities which may also include flight testing."

Down south, Karnataka, which produces more than 65 percent of India’s aerospace-related components and exports, has taken a number of initiatives to promote additive manufacturing by setting up 3D printing clusters and sponsoring 3D printing startups. For example, through its flagship programme ‘Start Up Karnataka’, the State has given grants to ‘Deltasys E-Forming’, a Belgaum based start-up, to develop hybrid composite 3D printers. These initiatives are quite appropriate since two-thirds of India’s aircraft and helicopter manufacturing for the defense takes place in Karnataka, and 3D printing would revolutionize these processes quite rapidly.

On the other coast, Chennai-based 3D printing startup, Fabheads Automation, was established in 2015 by an ISRO engineer turned entrepreneur Dhinesh Kanagaraj. The deep tech startup designs and develops high-end carbon fibre helicopter blades for the Indian Air Force. Traditionally, carbon fibre parts are fabricated by laborious manual processes with a lot of fabrication time and money spent. Dhinesh also observed a lot of material wastage when he worked on carbon fibres at ISRO.  Based on this, Fabheads has designed an automated 3D printer series to eliminate material waste and also improve efficiency of production of carbon fibre. Sectors like the DRDO are currently approaching the company given these innovative methods of production.

3D Printing Saves the Day for the Indian Navy

Further, the Indian Navy has partnered with ‘think3D’, a Hyderabad-based 3D printing start-up, to produce spare components via additive manufacturing for both on and off-shore set-ups. The Indian Navy uses a lot of machinery on its ships which are imported from other countries and are quite old.  Whenever a component gets damaged, it is hard to replace it either because there is no availability of the part or because there is significant delay before a part is received. This often proved to be costly for the Navy since the machines would have to be kept idle before a spare part was replaced along with the fact that procurement of the parts was no less expensive.

This is where think3D had stepped in and supplied 3D printed parts to the Indian Navy, which were successfully tested and incorporated into its machinery. An example of such a 3D printed part, which proved to be of crucial help, is that of a centrifugal pump impeller- a key component for a ship’s operation.

https://3dprintingindustry.com/wp-content/uploads/2020/04/4.jpg
Figure 3: An original impeller (left) vs. a 3D printed impeller (right). Image source: think3D

The impeller is a rotating component and it is very important for a ship as it transfers energy from the motor to a fluid that needs to be pumped by accelerating the fluid outwards from the centre of rotation.  On ships, this component is used to import seawater into various parts of the ship for regular use of the crew. These impellers are required to rotate at high speeds for long durations and need to be very carefully designed. 3D printing was the best solution to replace these parts, given the speed of production and lower expenses.

Given all the benefits of 3D printing, it is high time for the Indian market to expand its 3D printing industry and utilize it to its full potential. There are many other instances like the one of the impeller in the Aerospace and Defense industries which can easily be solved using 3D printing.

Read More